User`s manual

M4029-08 17 Seyeon Tech Co., Ltd
• Selective Access: User is allowed to use only the selected features. With this item selected,
user can now configure the details under the menu.
FlexWATCH Server can have multiple VS modules registered in it. When user ticks on any of Enable
checkboxes, other fields in that row are enabled to select.
• VS Module ID: The registered user can select VS Modules that are available. (VS Module is a
network device that has been registered in FlexWATCH® Server)
• Camera No.: Among the cameras of VS Module, select one to set up. (between 1 and 4)
• Alarm Control: Determine if Alarm control is to be allowed.
• PTZ Control: Determine if PTZ Control is to be allowed.
• Audio Control: Determine if Audio Control is to be allowed.
• Playback: Determine if searching can be done by recording conditions.
After finishing the registration process, click Apply button to add the user.
3.5.2. Edit
To edit a user account, select Edit. In this part, you can modify the existing user’s name, password,
and access permission. User ID is not allowed to change. Once selecting a user ID for edit, the usage
is the same as in Add section.
To see existing users, click Select UserId, and select a user to be edited. Then change the password,
name, or access permission, and click Apply button to save the setting. Setup of Access Permission
can be done the same way as in Add section.
3.5.3. Delete
To delete an existing user, select Delete.