User`s manual

FlexWATCH User Manual Part 3
4029 32 INTPLUS
that you use CBR and frame rate control to control data transmission instead of Bandwidth control. This
function is recommended for M-JPEG.
) This Network Bandwidth control may cause to slow down the access to admin page of FlexWATCH
server.
3. Click Apply button to save the new value of the bandwidth limit.
3.6. View Network Status
You can view the current values of Network settings for FlexWATCH® Server.
If you click Reload button, current setting values will be reloaded.
3.7. Network Status Notify
If network setting of FlexWATCH® Server is changed, E-mail is automatically sent to the recipient.
When you select Enable for Mail Notification, under the following situations, FlexWATCH Server will send e-
mails of current network settings to pre-registered recipients.
• When the server is connected to PSTN Modem connection with Dial-up to ISP by
event
• When the DHCP option is selected
• When the PPPoE option is selected