User`s manual

FlexWATCH User Manual Part 3
4029 27 INTPLUS
3.3.3. NVCP-Rx (Network Video Control Protocol) Port [FW-5450 Only]
1. Rx port is a TCP port number through which NVR server can communicate with FlexWATCH
®
server so that video can be transmitted into NVR server.
2. Default value is 50100 and can be between 10000 and 65535.
3. Active mode: NVR actively connects to other FlexWATCH® Servers on the network and
receives data from them.
3.3.4. NVCP-Tx (Network Video Control Protocol) Port [FW-3450 & FW-1130 & FW-3150 Only]
1. Tx port is a TCP port number through which FlexWATCH server can communicate with other
devices such as FW-5440 or FW-5000 NVR servers.
2. Default value is 50200 and can be between 10000 and 65535.
3. Passive mode: Other FlexWATCH® Servers on the Network connect to your NVS and they
receive data from your NVS.
3.3.5. Audio Port
Audio Port is a network port that gets audio input from user’s PC and sends out to audio out port of
FlexWATCH® Server. The default value is UDP 32001 and can be between 10000 and 65535.