User`s manual

FlexWATCH User Manual Part 3
4029 26 INTPLUS
2. Please enter your ID & Password provided by your ISP.
3. Enter your Password again in Confirm Password field.
Please click Apply button to save new setting values. If you don’t apply new settings, please click Back
to go back to previous page.
3.3. Network Ports
You can enter various Port numbers, which are used by FlexWATCH® Server, in order to
communicate with Client PC. Currently FlexWATCH® Server uses HTTP Port, NIPP Port, NVCP-Rx Port,
and Audio Port.
3.3.1. HTTP Port
1. HTTP Port is used for Web communication between Client PC and FlexWATCH® Server. By
assigning different HTTP port number for each server and configure port-forwarding feature of
Router, you can install more than one server behind the router. For more information about
this, please contact your local vendor.
2. Default value is 80 and it can be up to 65535.
) * If HTTP Port number is changed, you should enter HTTP Port number with your IP address in URL
section of Web browser.
(ex. If FlexWATCH® Server IP address is 192.168.1.100 and HTTP Port: 8080, then it should be like
http://192.168.1.100:8080 )
3.3.2. NIPP (Network Image Provider Protocol) Port [FW-5450 Only]
1. This is a port through which archived video can be playback through Internet. If NIPP Port is
not open to Internet no recorded video can be played back.
2. Default value is 50000 and can be between 10000 and 65535.