User`s manual

FlexWATCH User Manual Part 3
4029 20 INTPLUS
8. Once configuration is done, click “”Save” button. If you don’t want to register it, please click
“Back” button.
9. After Rx Module registration by “Save” button, please click “Apply” button to take effect.
2.7. Tx Module Registration [FW-3450 & FW-1130 & FW-3150 Only]
Tx Module Registration is to provide NVR (Network Video Recorder; FW-5450, etc.) with remote
channels from NVS (Network Video Server) or NC (Network Camera).
1. Please Click Tx Module Registration of System Configuration group.
2. The total number of Tx Module is 16. Thus Up to16 different NDVR servers can
simultaneously work with FlexWATCH server. Default setting for Tx Module is “passive”, so if
NVR’s Rx Module is “active” the NVS can connect to NVR right away.
3. You can select one Tx Module and change it to “active”.