User`s manual

FlexWATCH User Manual Part 3
4029 19 INTPLUS
5. NVCP Port (Destination Tx Port) should be the same as the service port number of remote
NVS or NCS you are about to register here. Default value is 50200 and the value can be up
to 65535. NVCP port field will only be activated when Connection Type is Active (Static IP).
6. VS Module ID is the number of the built-in module of NVS or NCS, which provides remote
channels. VS Module ID is always 0(default value) for any 1, 2, or 4 channel server. If you
select any other number, it won’t work properly.
7. NVCP Password should be the same as that of remote NVS or NCS you are about to register
here. The default NVCP password of FlexWATCH server is “nvcp”.