User`s manual

FlexWATCH User Manual Part 3
4029 18 INTPLUS
Active (Static IP) In case of the server has static IP. Please enter IP address of the server.
Using AOIP Server
In case of the server has dynamic IP and the server is registered in AOIP
server, which is provided for dynamic IP support. Please enter MAC address of
the server to be registered.
Local(Built-in) Local 4 channels of FW-5450. User can’t change this.
Passive
When the server has dynamic IP and the FW5450 has static IP, please enter
MAC address of the server to be registered.
4. Please input a server name in Name field. And select the right type of series of model. No
specific model can be selected. Note that some series of model is not available right now
such as 4200, 4600, 5800, etc. IP Address field will be activated when the Connection Type is
Active (Static IP) whereas MAC Address field will be activated when the Connection Type is
either Using AOIP Server or Passive.
Following is information about the series of FlexWATCH Models.
FW-1100 Series = FW-1100, FW-1110L, FW-1110LW, FW-1110, FW-1110D, FW-1110W,
FW-1120, FW-1130, FW-1130W, FW-1131, FW-1132, FW-1150, FW-1160, FW-1160E,
FW- 1160S, FW-1160SE, FW-1161S, FW1161SE.
FW-1200 Series = FW-1200
FW-1400 Series = FW-100A
FW-3100 Series = FW-200A, FW-3110, FW-3150
FW-3200 Series = FW-3210
FW-3400 Series = FW-3400, FW-3440, FW-3450
FW-3600 Series = FW-500A
FW-5000 Series = FW-5000, FW-5050
FW-5400 Series = FW-5440, FW-5450