User`s manual

FlexWATCH User Manual Part 2

M4028 23 INTPLUS

Figure 24 COM Port Settings

Serial Port Settings Value

Bits per Second 115200

Data bits 8

Parity None

Stop bits 1

Flow control None

2.4.2. System Login and Network Configuration by Hyper Terminal

1. After setting Hyper Terminal, press Enter key several times and then you can see

messages below. Enter Login ID and Password. (Factory defaults for Admin ID and

Password is root/root.)

Seyeon Tech Co., Ltd. 2001-2003

Linux Kernel 2.4.21-syl1

FlexWATCH login:

2. If you correctly enter ID and Password, ‘bash#’ prompt will show up as below.

FlexWATCH login: root

Password: root

-----------------------------------------------------------

SYSTEM : FlexWATCH

VERSION : 3.0.070327-mpeg

MODEL : FW-5450-S

-----------------------------------------------------------

bash#