User`s manual

FlexWATCH User Manual Part 2
M4028 20 INTPLUS
Figure 20 In case of selecting 1 server for PPPoE IP Assignment
Menu Description
IP Type Select ‘PPPoE’
Server Name Assign a name to selected FlexWATCH
HTTP Port Default web port for FlexWATCH. Default value is 80.
PPPoE Setup
Notice) You can check out the correct ID/Password from your ISP.
PPPoE User Name Enter PPPoE ID
PPPoE Password Enter PPPoE Password
PPPoE Confirm Enter PPPoE Confirmed Password
Root Password
Password for FlexWATCH server to authenticate a valid user. The
default password for FlexWATCH is root.
Save Configuration Option
Save Configuration All the changes will be stored in Flash Memory.