User`s manual

FW3150 User’s Manual Part 1
4031 5 INTPLUS
1.3. Technical Specification of FW-3150
Model Name FW-3150
Hardware
32bit Embedded CPU
Flash 8Mbytes /SDRAM: 32Mbytes
Linux version 2.4.21 operating system
Battery backed up real-time clock
Video
compression
Motion JPEG
MPEG-4
Resolution
NTSC: 704x480,704x240,352x240,176x112
PAL: 704x576,704x288,352x288,176x144
Frame rate
(each channel)
Motion JPEG: Up to
30/25 fps at D1 (Secondary Stream at QCIF)
MPEG-4: Up to
30/25 fps at D1 (Secondary Stream at QCIF)
Video Streaming
Motion JPEG and MPEG-4 Dual Streaming (Simultaneously)
Controllable frame rate and bandwidth
Image setting
Compression levels: 6 (Motion JPEG) / 6 (MPEG-4)
Color: color, black & white
Voice
APCM 4bit IMA Sampling rates 8KHz Audio
1ch in & 1ch out
LAN interface 10/100BaseT Ethernet auto sensing
Alarm I/O Interface 1 Photo-coupled inputs and 1 Relay output
Video Input 1 Channel Composite Video Input
Video Output 1 loop through analog video outputs
Serial Interface
Two serial ports for console, modem(PSTN & GSM), serial input/output
device, PTZ
COM Port is RS-232,
AUX port can be configured as RS-232, RS-485
Max Baudrate: 115200 bit/s
Security features
Multi user level protection for camera access,
PTZ, Alarm I/O
Advanced Service
Up to 2.2M memory for Pre/Post alarm buffer
e-mail, FTP, alarm Buffer by event or schedule
IP notification, Alarm Notification to e-mail,
CGI Call by event or schedule
Built-in Motion detections
Accuracy: 12x12=144 blocks
Motion Sensitivity : -100 ~ 100 : 100 is hypersensitive
PTZ & UART Control
Support
PTZ and UART device control through serial interface Up to 35 PTZ
protocols from Pelco “ P” & “ D” protocol, Vicon V1311RB,
Samsung, Honeywell and Etc,.X10 device control
Dial in/out via PSTN or GSM modem
Others
Transmit Serial input data transfer with Video
IP notification by e-mail
Management
Configurable by serial, web or telnet
Remote system update via telnet, FTP OR web browser.
Developer support
Provides HTTP CGI API
ActiveX control development kit
PWR Supply
SMPS input: 100~240VAC, 300mA
Output: DC 12 Volt, 800mA