User`s manual

FlexWATCH User Manual Part 2
M4028 9 INTPLUS
2.1. Through FlexWATCH Installer
2.1.1. What is FlexWATCH Installer?
FlexWATCH Installer is a program which enables you to simply configure the FlexWATCH
Products such as IP setting, server and camera setting, firmware update, and so on. Please refer to
FlexWATCH Installer manual included in CD-ROM provided with the product you purchased and you
may want to refer to latest available documents on our website (http://www.flewatch.es). FlexWATCH
Installer manual has been written on the assumption that you are familiar with basic network
knowledge such as IP address, LAN, HUB, Router, and so on. For the basic network knowledge,
please refer to the related books, or you may ask your network service provider or network
administrator.
FlexWATCH Installer can be used for FlexWATCH Linux series (FlexWATCH 1110 / 1120 /
1130 / 1161 / 2140 / 2150 / 3110 / 3150 / 3440 / 3450 / 5000 / 5440 / 5450) products; however, there
may be some differences based on models.
2.1.2. Installation of FlexWATCH Installer
1. Please double click on the FlexWATCH Installer Icon.
2. Click Next.
3. Please Check the version of FlexWATCH Installer and if you want to install it, please
click Next.
Figure 7 FlexWATCH Installer First Installation Screen
4. Select the installation location, please click Install.
The default location is C:\ProgramFiles\FlexWATCH\FlexWATCH Installer, and if you want to
change the location, you may click Browse and select the desired folder.