User`s manual

FlexWATCH Installer M1402-1
INPTLUS
19
7. Camera & Recording Condition Setup
7.1 Configuration menu
Menu Description
A.
Model
Displays the model names of the selected FlexWATCH servers.
B.
MAC Address
Displays the MAC addresses of the selected FlexWATCH servers.
C.
Server name
Type the name of your FlexWATCH server if you want to change.
D.
Camera name
Type the name of your Camera if you want to change.
E.
Size
Select the image resolution.
Notice) For MPEG4 supported FlexWATCH, the same image resolution
will be applied to the other channels at the same device.
F.
Quality
Select the image resolution.
G.
Motion
If YES, the motion detection function will be enabled.
H.
Record
Setup the recording condition.
Motion – Recording only when motion is triggered.
‘Motion’ needs to be set to ‘YES’.
Always – Recording always.
None – Disable the recording function.
Notice) For FlexWATCH NVR models with built-in HDD.
I.
Rate
Setup the recording frame rate (fps)
J.
Progress
Displays the progress when click ‘Set’ button.
A B C
D E F H I J
K L
M
N