User`s manual

FlexWATCH Installer M1402-1
INPTLUS
18
Time Zone Select a proper Time Zone.
B.
AOIP setup
Setup the AOIP service.
Enable If YES, AOIP service will be enabled.
If NO, AOIP service will be disabled.
AOIP server Input a proper AOIP server address.
C.
Model
Displays the model names of the selected FlexWATCH servers.
D.
MAC Address
Displays the MAC addresses of the selected FlexWATCH servers.
E.
Server name
Type the name of your FlexWATCH server if you want to change.
F.
Access
Setup the access permission level to FlexWATCH server.
If select Full, ID/PW is not required to access to FlexWATCH server.
If select Limited, ID/PW is required to access.
G.
Change PW
Select YES if you want to change the Password.
H.
New PW
Input the new password.
I.
Confirm PW
Input the new password again.
J.
Progress
Displays the progress when click ‘Set’ button.
K.
Status
Displays the status of the progress.
L.
Password
Input the admin password (root).
If not, any changed values can not be applied.
M.
Apply to all
If you click it after setting a listed item, the same values will be
automatically applied to the other listed items.
L.
Set
Applies the changed settings to FlexWATCH server.
O.
Close
Close the dialog window without saving.