User`s manual

FlexWATCH Installer M1402-1
INPTLUS
15
B.
Server Name
Type the name of your FlexWATCH server if you want to change.
C.
HTTP Port
Input the web port to access the homepage of FlexWATCH. The default
value is port 80.
D.
Authentication Key
Password for authentication ID is root. The default is root.
E.
Save Configuration Option
Save Configuration Save all the changed configurations to Flash Memory.
Not Saving Close the window without saving any changes.
Warning) If selecting no saving, reconfiguration will be needed if the
server powers off or reboots.
5.3 IP Assignment by PPPoE
1) Connect your PC and FlexWATCH server in the network.
2) Setup a static IP address according to the steps in section ‘5.1 Static IP Assignment, Manual or Auto
Setup’.
3) After IP Setup, check if you can access the homepage of FlexWATCH server by clicking the
“Connect” icon.
Notice) If AOIP service is needed for remote access, make sure to setup AOIP function in the
admin menu of your FlexWATCH server.
4) Run FlexWATCH Installer again, and select FlexWATCH on the search list, Click IP Setup and
specify PPPoE option.