User`s manual

FlexWATCH Installer M1402-1
INPTLUS
12
D.
IP Type
Select ‘Static’.
E.
IP address
Type a proper IP Address to be assigned at your FlexWATCH server.
F.
Netmask
A Net Mask is used to divide an IP address into subnets and specify the
networks available hosts. Contact your network administrator for more
information.
G.
Gateway
Default gateway will be set automatically.
(If not, type the given default gateway from your network administrator.)
H.
DNS1, DNS2
Domain Name Service is an internet or other type of network server that
helps to identify domain names.
I.
HTTP port
Input the web port to access the homepage of FlexWATCH. (The default
value is port 80)
J.
Authentication Key
Password for authentication ID is root. The default is root.
K.
Apply to all
After setting one item on the list, all the other listed items will have the same values you set.
‘Server name’ and ‘IP address’ will automatically have +1 value in order.
Notice) Many items can be easily set at once. It’s useful when you are
installing many items in a project site.
L.
Save & Close
To apply, save the changed configurations to flash memory and close the
window.
M.
Cancel
Close the window without saving the changes.
3) After IP configuration, click ‘Connect’ icon to access FlexWATCH. See live view of
FlexWATCH or specify system configuration on admin menu. Refer to section ‘10. How to see
FlexWATCH’s live view’ and ‘User Manual for FlexWATCH’ for more details of system
configuration and live view.
B. Auto Setup
FlexWATCH Installer can find and recommend you an IP address that is currently not being used in the
same network of your PC. Users can apply the auto-recommended IP, or input another IP.
Warning) Any of the auto-recommended IP may cause a network collision and problem if it’s
already assigned to another device in the same network.
1) Connect your PC and FlexWATCH server in the network.
2) Run FlexWATCH Installer, select FlexWatch server from the search list and click
‘Automatic IP Setup’.