User`s manual

FlexWATCH User Manual Part 3
4029 66 INTPLUS
7. After recording condition settings, please click “Save” and click “Back” to go back to the
previous page to check the status of Condition 1 as following image.
8. After completion of all of recording configuration, Please click “Record” button to start
recording. Click “Apply” button to put new setting values into Flash memory.
) When you click Record button, the record button becomes Stop button. If you want to stop
Recording, you can click Stop button.
6.3. View Recording Profile
You can see all the setting values that you have set for all the cameras in a pop-up window.
1. Click View Recording Profile.
2. Then you will see a pop-up window.