User`s manual

FlexWATCH User Manual Part 3
4029 65 INTPLUS
6. You can configure the recording conditions for each camera.
EX) Select Mode: Schedule and Event
Schedule: Tue.
Event: Motion Detection on CH 1
Condition 1: When motion is detected in CH1 on every Tuesday, FW-5450 will do
recording.
Menu Options Description
Always 24hours 365days recording
Schedule Only Recording by Date, Time or Day
Event Only
Recording by Events such as Alarm, Motion, and Camera
Disconnection.
Select Mode
Schedule and Event Recording by Schedule and Events
Week You can set from Sunday to Saturday
Time You can set Time
Schedule
Date You can set Date
Alarm Sensor Recording by Alarm sensor from DI
Motion Detection
1,2,3,4 refer to Camera number. If 1 is checked, when
motion is detected in CH1, FW-5450 will record images.
For example, if all 1,2,3,4 are checked, then when all of
Ch1, Ch2, Ch3, and Ch4 have detected motions, FW-
5450 will record images from Camera 1 in the above
case.
Camera Connected
When Camera is physically connected to FW-5450, it will
record.
Event
Camera Disconnected
When Camera is physically disconnected to FW-5450, or
power of Camera is off, it will record.