User`s manual

FlexWATCH User Manual Part 3
4029 61 INTPLUS
6. When you enable the “check Bad Block” option, the FlexWATCH will check the surface of the
HDD for detecting bad blocks. This format takes longer format time and may be several hours
depending on the size of HDD.
Format times are as follows:
z 80G HDD : about 3 minutes
z 120G HDD: about 5 minutes
z 160G HDD: about 7 minutes
z 250G HDD: about 10 minutes
7. When you click “Partition and Format” button, you will see a pop-up window as below. If you
want to format the HDD, please click OK. Otherwise, click Cancel.
8. If you click OK, you will see the below pop-up window. Please click “Yes” to close the
webpage.
9. After closing webpage, you can check the status of HDD format as below image.