User`s manual

FlexWATCH User Manual Part 3
4029 60 INTPLUS
6. Recording Configuration [FW-5450 Only]
Only when you install a HDD into FlexWATCH® 5450, you can record & search images. Recording
configuration menu won’t be available if FW5450 is without a HDD. You can do HDD format, HDD
information check, motion & event condition setup for recording, etc.
6.1. HDD Configuration
You can do HDD format and HDD information check in this menu.
6.1.1. HDD Format
1. Please turn off FW-5450.
) When you install a HDD (Hard Disk Drive), please turn off the FW5450. Otherwise, the HDD might
have a problem.
2. Install a HDD and turn on the FW-5450.
3. Please access to the web page of FW-5450 and go to “Admin” menu. Click “Recording
Configuration”.
4. Please check current format status of the HDD by Clicking “HDD Information”.
5. If HDD Information has “-None-“, it hasn’t been formatted yet. Thus, please click “Back” and
click “HDD Format”.