User`s manual

FlexWATCH User Manual Part 3
4029 55 INTPLUS
z Check All: can set all the motion detected area at once.
z UnCheck All: Clear all the motion detected area.
z Motion Sensitivity: you can change motion Sensitivity between -100 and 100. (100 is most
sensitive.)
6. You can configure Secondary Stream.
In case of MPEG-4
In case of M-JPEG
) Almost all parameters are dependent on Primary Stream.
4.4. Audio Configuration [FW-3450 & FW-5450 Only]
FW-3450 & FW-5450 support 2-way audio streaming function. Firstly, they get the audio inputs from 4
channels and transmit the audio data with video. And FlexWATCH server also receives the audio data
from user’s PC and sends out through the Audio output of FlexWATCH server.
Without any external audio devices, you can not only use synchronized audio and video from each
channel but also send user’s voice or any other sounds to FW-3450 & FW-5450 by PC’s microphone and
you can hear this audio from FW-3450 & FW-5450 with a speaker.
You can configure the audio functions as below.