User`s manual

FlexWATCH User Manual Part 3
4029 53 INTPLUS
) The Image Size of Primary Stream equals to the Maximum Image Size of Secondary Stream.
Because video source of Secondary Stream is from Primary Stream.
9 You can configure CCD functions for FW-1130 as below.
z FLK (Flickerless): To protect video flickering caused by AC frequency.
z AGC (Automatic Gain Control): To control CCD sensitivity by Gain control.
z BLC(Back Light Compensation): To control the image quality under Back Light
z ELC (Electronic Light Control): To control brightness by automatic shutter speed.
) Configuration of Secondary Stream is limited because video source of Secondary Stream is from
Primary Stream. Configuration for Camera Install, Video Source to Gray, Hue, Saturation, Contrast,
Brightness, and Motion Detection is dependent on Primary Stream’s settings.
3. To configure Primary Stream, please click Primary Stream.
In case of MPEG4
In case of M-JPEG
z Camera Name: Channel’s name with 21 Alpha-numeric letters or 10 Unicode letters.