User`s manual

FlexWATCH User Manual Part 3
4029 45 INTPLUS
4. Base Address + CH # should be equal to PTZ camera address.
Example) Base Address: 0
FW3450 ch1 ~ ch4: value of 1~4.
PTZ camera address connected to CH1: 1
PTZ camera address connected to CH2: 2
PTZ camera address connected to CH3: 3
PTZ camera address connected to CH4: 4
5. After checking channel numbers, please click Save button to save new setting values. The
above figure is when only CH1 has a PTZ device connected.)
6. If PTZ camera or Receiver has preset function. You can configure preset positions by clicking