User`s manual

FlexWATCH User Manual Part 3
4029 44 INTPLUS
When you install a RS-485/422 interfaced PTZ model:
PTZ device has to be connected to RS422/485 in AUX port.
When you install a RS-232 interfaced PTZ model:
PTZ device has to be connected to RS232 in AUX port.
After making connection to AUX port, please select PTZ camera or Receiver model in the PTZ list. And
click “Apply” button to save new settings.
3. After selecting the model name, click “Module 0”. And then, please check channel number
which PTZ camera is connected to.
) * Before you purchase a Receiver or PTZ camera, please contact your local supplier or Seyeon Tech
Co., Ltd. to check if the PTZ device is supported by FlexWATCH Server or not.
) * You can see current supported PTZ protocol by looking at the PTZ model list. (Currently 34 PTZ
camera models are supported and more PTZ devices would be added later.)