User`s manual

FlexWATCH User Manual Part 3
4029 40 INTPLUS
4. Device Configuration
You can configure camera related settings for FlexWATCH®.
4.1. Serial Ports
Basically COM port is for Console and AUX is for PTZ; however, they can be used for other functions.
4.1.1. Serial Input Mode
Serial Input Mode is for getting inputs from various sensors through AUX port of FlexWATCH® Server
and sending you Camera’s images by E-mail, FTP or Alarm Output. For example, when the water level of a
dam reaches the specific level, FlexWATCH Server can send you the image of the water level. Or after
checking the speed of cars on highway, if it reaches the speed limit, FlexWATCH server can send the image
of car plate number to you. These kinds of functions can be managed by COM and AUX ports.
1. Serial Input Mode configuration
In web Admin page, please go to Device Configuration group. And click Serial Ports and select Serial
Input in COM Mode. Click Apply button.