Specifications
86
87
5-1. Using the Bluetooth Settings Dialog
5. Bluetooth
This Menu sets Bluetooth communication.
1. Select Setup Menu – Bluetooth – Security.
2. Select one of Enable and Disable.
3. Selected option is displayed as shown below
4. Press Enter( ) button to exit.
5-1-1. Enabling the Security
NOTE
Refer to “3-1-14. Bluetooth Interface” for the Bluetooth conguration.
Diagnostics
Stock Power
Online
Diagnostics
Serial
Communcation
Power
Management
Local Name
Exit
1. Select Setup Menu – Bluetooth – Change Pin.
1. Select Setup Menu- Bluetooth – Local Name
2. The screen to set Local Name appears as shown below.
2. Screen to set PIN appears as shown below.
3. On above screen, if Up(▲) button is pressed then the position of cursor moves towards right
side by one step. If Down(▼) button is pressed then the selected character is increased.
3. On above screen, if Up(▲) button is pressed then the position of cursor moves towards
right side by one step. If Down(▼) button is pressed then the selected character is
increased.
4. Press Enter( ) button to save and exit.
4. Press Enter( ) button to save and exit.
5-1-2. Change Pin
5-1-3. Local Name
Local Name
Address