Specifications

78
79
Select reboot module, the following message is shown. Select “Yes”, the Module is reset.
Restart Module
Figure 17 – Module Reset
4-3-8. Updating a Field
To update a eld, select the eld by pressing the Left Hand mouse button. Then either type in
the appropriate content or select form the pull down menu.
Once you have nished modifying parameters, scroll to the bottom of the page and press the
Commit button. The page will then indicate the changes have been completed successfully,
you can then return to the conguration page by pressing the Reload button or restart the
module by pressing the Reboot button
Before the Commit button has been pressed, all modied elds can be returned to their original
state by pressing the Cancel button.
Figure 18 – Updating a eld
NOTE
The changes to the parameters will not be applied until a module restart has been completed.