Specifications

74
75
Delete Certicate
Table 3 - Uploading Certicates
Figure 12 – Delete Certicate
Step Description
Navigation Bar
Select Conguration
You will see a list of certicates currently resident on the module
when you enter the Certicate File List window.
Feature Bar
Select Upload Certicates
You will see a window open with eld to enter the location of the
certicate you want to upload.
Press Browse... Button
This will open a dialog box in which you can locate the certicate
you wish to upload to the module. Select the Certicate le and
press Open.
This will return you to the Certicate Upload window and will
have entered the location and le name of the certicate you
wish to upload in the eld next to the Browse… button.
Press Upload Certicate
You will then see a notice that the certicate has been
successfully uploaded to the module.
Delete a security certicate from the module.
4-3-6. Network
The “Scan for Access Points” are in the “Network” menu.
“Scan for Access Points” shows “MAC Address, ESSID, Mode, Frequency, Quality, Signal
level, Noise level, Encrytion key, Bit rates, Protocol, Extra” information for the terminals which
are connected the AP linked to the Module.
Figure 13 – Scan Results