Specifications

70
71
WINS Server1 IP Address
Congures the Primary WINS Server Address. This value is used for WINS lookups. If the DHCP
Client is enabled, the wins-server1 value will be updated if the DHCP Server provides one.
Default is 0.0.0.0.
WINS Server2 IP Address
Congures the Secondary WINS Server Address. This value is used for WINS lookups, if the lookup
fails using the value from wins-server1. If the DHCP Client is enabled, the wins-server2 value will
be updated if the DHCP Server provides one.
Default is 0.0.0.0.
When DHCP Enable →
DHCP Request Retransmission Mode
Congures the DHCP request retransmission mode to either Exponential Interval or Fixed
Interval. Default is Exponential Interval.
DHCP Request Retransmission Interval
Congures the DHCP request retransmission interval (in seconds) to use when wl-dhcp-
mode is set to xed. This is an integer with a range of 1-64.
Default is 15.
The Airborne Device Server module supports both OEM and User conguration les for
provisioning the module. Delivery of these conguration les can be performed through the
web interface.
To upload conguration les follow the steps in Table 2.
In this menu, you can load the Conguration le and save to the Module.
Upload Conguration Files
Figure 9 - Upload Conguration Files Web Page
Table 2 - Uploading Congurations
Step Description
Navigation Bar
Select Conguration
You will see major WLAN parameters displayed.
Feature Bar
Select Upload Conguration
File
You will see a window open with eld to enter the location of the
conguration you want to upload, along with a choice of OEM or
User Conguration.
Press Browse... Button
This will open a dialog box in which you can locate the certicate
you wish to upload to the module. Select the conguration le
and press Open.
This will return you to the Conguration Upload window and will
have entered the location and le name of the certicate you
wish to upload in the eld next to the Browse… button.
Select User or OEM
Conguration
This denes the conguration you are installing. OEM
Congurations will survive a factory reset, User Congurations
will not.
Press Upload Conguration
You will then see a notice that the conguration has been
successfully uploaded to the module.
Uploading a conguration le will overwrite any conguration le already stored on the module.
This will cause a change in conguration when a module restart is performed.
Conrm that the OEM or USER settings in the conguration les will allow the user to communicate
with the module after the upload and a restart has been completed.
IMPORTANT!!