Specifications

60
61
Setting the security congurations in Wireless LAN
WLAN Security Settings
Figure 7 – WLAN Security Settings Web Page
WLAN Security Type
Selects the Wireless Security Method for Authentication and Encryption.
Disabled = Wireless security is disabled.
WEP64 = WEP with 64-bit key length (sometimes referred to as 40-bit).
WEP128 = WEP with 128-bit key length.
WEP-LEAP* = LEAP with WEP encryption.
WPA-LEAP* = WPA CISCO LEAP. Requires LEAP username and password.
WPA-LEAP64* = Migration mode w/ Cipher suite TKIP+40-bit WEP using EAP (LEAP).
Requires LEAP username and password.
WPA-LEAP128* = Migration mode w/ Cipher suite TKIP+128-bit WEP using EAP (LEAP).
Requires LEAP username and password.
WPA-PSK = WPA Pre-Shared Key. Requires WPA Passphrase.
WPA-PSK64* = Migration mode w/ Cipher suite TKIP+40-bit WEP using WPA PSK.
Requires WPA Passphrase.
WPA-PSK128* = Migration mode w/ Cipher suite TKIP+128-bit WEP using WPA PSK.
Requires WPA Passphrase.
WPA-PSK128-TKIP* = Migration mode w/ Cipher suite TKIP and/or 128-bit WEP for the
Group Cipher using WPA PSK. Requires WPA Passphrase.
Authentication Type
Congures the authentication type.
Auto = Authenticate using Open Key algorithm.
Open = Authenticate using Open Key algorithm.
Shared = Authenticate using Shared Key algorithm.
Default is Auto.
When WEP64 / WEB128 →
Default WEP Key
Congures the default WEP key index. This must match the key index congured on the AP.
Range is 1 - 4.
Default is 1.
WEP Key 1~4
Sets WEP Key 1~4 to binary value. Can be 10 or 26 hex digits
(10 digits for 64 bits, 26 digits for 128 bits).
Default is 00000000000000000000000000.
When WEP-LEAP →
LEAP User Name
Congures the WPA-LEAP username. The LEAP username can be 1 to 32 characters and must
match the LEAP username assigned on the LEAP server.
Default is admin.
LEAP Password
Congures the WPA-LEAP password. The LEAP password can be 1 to 32 characters and must
match the LEAP password assigned to the LEAP user on the LEAP server. The LEAP password
cannot contain spaces.
Default is admin.
WPA2-PSK = WPA2 Pre-Shared Key (WPA2-Personal). Requires WPA Passphrase.
WPA2-PSK-TKIP* = WPA2-PSK Migration mode w/ Group Cipher suites TKIP and/or WPA2
Pre-Shared Key (WPA2-Personal). Requires WPA Passphrase.
PEAP* = EAP-PEAP with tunnelled EAP authentication.
TLS* = EAP-TLS. Requires both a Client and Server (CA) certicate.
TTLS* = EAP-TTLS with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 authentication.
WPA-FAST* = EAP-FAST w/ Cipher suite TKIP.
WPA2-FAST* = EAP-FAST w/ Cipher suite AES-CCMP.
Default is Disabled.
NOTE
Security methods marked with a * are not available in AP mode.