Specifications

48
49
Setting the Protocol
Setting the SSID
This option sets the Protocol.
1. From the Congure menu, select Protocol : TCP or LPD. (TCP Fixed)
This option sets the SSID. The SSID is case-sensitive.
1. From the Congure menu, select SSID.
2. Use ▼ to select the protocol you want. For example, if you select LPD, you must
specify a raw printer port:
Use buttons as shown in the following table:
Use buttons as shown in the following table:
▶(▲)
Press ▲ to
+(▼)
Press ▼ to
1
Press to
Scrolls through the
positions
from left to right
Toggles between + or –
also increments the current
position setting by 1
Saves the setting
▶(▲)
Press ▲ to
+(▼)
Press ▼ to
1
Press to
Scrolls through the
positions
from left to right
Increments the current
position setting by 1 and
scrolls through
alpha/special characters
Saves the setting
3. Press to save the setting. You return to the Congure menu.
2. When the setting you want is displayed, press to save the setting. You return to
the Congure menu.
You can see a network IP address.
1. Turn on the printer.
2. Press ▲ under <T>. You see the printer’s IP address. For example,
3. Press or ▲ to exit.
**Network Information
Exit