Specifications

40
41
1. Select Setup Menu – Power Management - Low Power
2. Select the Power Save Time among disable, 10 sec, 20 sec, 30 sec, 1 min, 2 min, 5 min,
10 min, 30 min, 1 hour.
3. Selected time is displayed and buzzer sounds short two times.
4. Pressing Enter( ) button.
5. Select Exit to return to the Setup menu.
3-1-6. Power Management
This Menu sets Power Save Timeout.
(If USB cable is connected the printer does not go into Power Save). If the printer goes into Power
Save Mode, wake-up the printer by connecting the USB cable, or pressing Power( ) button, or
send data to the serial port.
1. Select Setup Menu – Power Management -Shut Down
2. Select the Power Save Time among disable, 10min, 20min, 30 min
3. Selected time is displayed and buzzer sounds short two times.
4. Pressing Enter( ) button.
5. Select Exit to return to the Setup menu.
min
min
Shut Down Mode
Diagnostics
Stock Power
Serial
Communcation
Power
Management
Online
Diagnostics
20 Sec
RF Network
Serial Communcation
Power Management
RF Network
Serial Communcation
Power Management
20min