User's Manual

3-2. Battery Charging

1. The battery can be charged only when the temperature is 0~40°C.

2. Be sure that the printer is turn off and the battery to be charged is installed.

3. Connect the charger to the printer.

4. Recharging will now be started.

3-3. Loading the Media

1 2

Press the cover open button.

Place the paper roll as shown in the picture.

(Make sure the paper is placed in right direction.)

Pull a short length of paper out of the

printer and close the cover as shown

in the picture.

Press feed button and let the paper be

arranged properly for printing and cut the

extra paper with tear bar.

Notes

1. Do not turn on the printer power while you are charging the battery.

2. Dot not print while charging the battery

3. Do not connect the charger to the printer on the process of printing.