User's Manual

3-2. Battery Charging

Notes:

1. Do not turn on the printer power while you are charging the battery.

2. Do not print while charging the battery

3. Do not connect the charger to the printer on the process of printing.

3-3. Battery charger Usage

1. Please press the battery into the holder until you can hear a snapping sound .

2. Insert DC JACK

①

into the end completely as the direct shown above.

3. Plug the power code to electrical outlet.

4. While charging the battery, red light turns on.

Once the charge is completed, green light turns on.

Check the state of code connection when error occurs blinking on red light.

1. The battery can be charged only when the temperature is 0~40℃

2. Be sure that the printer is turn off and the battery to be charged is installed.

3. Connect the charger to the printer.

4. Recharging will now be started.