User's Manual

18
19
Printing Method Direct Thermal
Printing Speed
80mm/sec
Resolution
203 DPI X 203 DPI
Character ALPHA NUMERIC Character, Extension Character
Barcode Code 39, Code 93, UCC/EAN-128, Code 128, UPC-E,
UPC-A, EAN-8, EAN-13, EAN-14, UPC and EAN 2 or 5
digit extensions, Plessey, FIM, Postnet, Interleaved 2-of-5,
MSI, Codabar
Emulation CPCL
Driver Window CE 4.2&5.0, Window Mobile 5.0
Sensor Black-mark, Gap, cover open
Paper paper type Thermal Paper
width 58mm
thickness
65㎕
External Diameter Max.
Φ 56mm
Internal Diameter
12.5mm +/-0.5mm
Reliability TPH 100km
Communications standard Serial(RS-232C), USB, Bluetooth Class2
option Wireless Lan *802.11b/g
Battery Charger
input AC100~240V, 50/6 Hz
output 8.4V , 1200 mA
Battery Charger
Battery type Li-on
output
7.2V, 2400mAh
Charging time
2 Time
Size
WXDXH(mm) 104 X 74 X 154
WXDXH”
4.0 X 2.9 X 6.0
Weight
500g
6-1. Specification
6. Pritner Specification
5. Printer cleaning
If the interior of the printer is dusty, printing quality can lowered.
In such a case, follow the instructions below to clean up the printer.
NOTE
1. Make sure to turn the printer power off prior to cleaning
2. Regarding print head cleaning, as the print head sets very hot during
printing, turn off the printer power and wait approximately 10 minute before
commencement.
3. When cleaning the print head, take care not to touch the heated portion of the
print head. The print head subject to be damaged by static electricity.
4. Take care not to allow the print head to become scratched and /or damaged in
1. Use an applicator swab moistened with an alcohol solution to clean the print head
and remove any dusts.
2. Once the cleaning is completed, insert paper roll into the printer few minutes later
and close the printer cover.