User's Manual

Sewio Networks, s.r.o,
www.sewio.net, email:[e-mail]
3
Anchor User Manual
Power-Up
Power Over Ethernet
Please connect Anchor to network switch supporting PoE IEEE 802.3af
standard and connect anchor with shielded Ethernet cable (CAT6 or higher).
Maximum cable length is 100 m for PoE from anchor to PoE switch.
Once the Anchor is connected to a stable power supply, a blue LED blink
several times that indicates the anchor was turned ON. Then LED is turned
OFF.
Device Mounting
Adjustable holder with degree scale Mikrotik quickMOUNT PRO LHG is
recommended for permanent anchor installation for both horizontal and
vertical placements. It allows to mount anchor directly to the wall and have
accessories to mount it on console or pillar. Mobile deployments can utilize
the whitworth ¼” as it is compatible with the most off-the-shelf tripods and
CCTV holders.