Operating instructions

Compact Operating Instructions – DOP11C

General information

Safety notes

2 Safety notes

2.1 General information

• Read the safety notes carefully.

• Check the delivery for damage caused during transport on receipt. If damage is

found, advise your supplier.

• The panel meets the requirements of article 4 of the EMC Directive 2004/108/EC.

• Do not use the operator panel in or near a mining facility or outdoors, or in areas

where there is a risk of explosion or fire hazard.

• SEW-EURODRIVE is not liable for modifications, changes, additions and/or

alterations to the product.

• Use only spare parts and accessories manufactured according to the specifications

of SEW-EURODRIVE.

• Read the installation and operating instructions carefully prior to installation, use or

repair of the operator panel.

• Never allow fluids to penetrate the slots or holes in the operator panel. This may lead

to a fire or cause the equipment to become live.

• Operation of the panel is restricted to qualified personnel.

2.2 Target group

Any mechanical work may only be performed by adequately qualified personnel. Quali-

fied personnel in the context of this documentation are persons familiar with the design,

mechanical installation, troubleshooting and servicing of the product who possess the

following qualifications:

• Training in mechanical engineering, e.g. as a mechanic or mechatronics technician

(final examinations must have been passed).

• They are familiar with this documentation.

Any electronic work may only be performed by adequately qualified electricians. Quali-

fied electricians in the context of this documentation are persons familiar with electrical

installation, startup, troubleshooting and servicing of the product who possess the

following qualifications:

• Training in electrical engineering, e.g. as an electrician or mechatronics technician

(final examinations must have been passed).

• They are familiar with this documentation.

In addition to that, they must be familiar with the relevant safety regulations and laws,

especially with the requirements of the performance levels according to

DIN EN ISO 13849-1 and all other standards, directives and laws specified in this

documentation. The above mentioned persons must have the authorization expressly

issued by the company to operate, program, configure, label and ground units, systems

and circuits in accordance with the standards of safety technology.

All work in further areas of transportation, storage, operation and waste disposal must

only be carried out by persons who are trained appropriately.