Operating instructions

44
Compact Operating Instructions – DOP11C
9
Chemical resistance
Appendix
9.1.3 Solvent resistance of the coating
Autotex F157 /
F207, Autoflex
EBA180L
According to DIN 42115 part 2, Autotex F157 / F207, Autoflex EBA180L can be exposed
to the following chemicals for more than 24 hours without showing any noticeable
changes:
According to DIN 42115 part 2, Autotex F157 / F207, Autoflex EBA180L is resistant to
glacial acetic acid for 1 hour maximum without any noticeable changes.
Autotex F157 / F207, Autoflex EBA180L is neither resistant to high pressure steam of
over 100 °C nor to the following chemicals:
Acetonitrile Fuel Downey / Lenor
1)
1) A barely noticeable shininess was detected.
Phosphoric acid (<30%)
Dissolved abrasive cleaner (Ajax /
Vim)
Ethanol Potassium ferrocyanide / ferricya-
nide
Alkali carbonate solution Glycerin Potassium hydroxide (< 30%)
Ammonia
1)
(< 40%) Glycol Pure turpentine
Acetic acid (<50%) Gumption
1)
SBP 60/95
1)
Dissolved Ariel powder (laundry
detergent) (1)
Hydrochloric acid (<36%) Sulfuric acid (<10%)
Bleach
1)
Linseed oil Ketchup
Caster oil Methanol Trichloroacetic acid (< 50%)
Sodium hydroxide
1)
(<40%) Nitric acid (<10%) Test gasoline
1)
Drilling oil Paraffin oil Windex
1)
Cyclohexanol Dissolved Persil powder (laundry
detergent) (1)
Wisk
Diacetone alcohol - -
Concentrated inorganic acids Benzyl alcohol
Concentrated etching solution Methylene chloride