Operating instructions

Compact Operating Instructions – DOP11C

Chemical resistance

Appendix

9 Appendix

9.1 Chemical resistance

9.1.1 Metal housing

The frame and housing are made of powder-coated aluminum. This powder coating can

be exposed to the following substances for more than 24 hours without any visible

changes:

The powder coating is partly resistant to the following chemicals at room temperature:

The powder coating is not or barely resistant to the following chemicals at room temper-

ature:

9.1.2 Solvent resistance of the display

The display can be exposed to the following substances for given time period the without

any visible changes:

Sea water Tap water

Diesel oil / fuel oil Sodium chloride solution 2% / 20%

Deionized water Phosphoric acid 4% / 10%

Acetic acid 10% Sulfuric acid 20%

Hydroperoxide 3% Cooking oil

Citric acid -

Butanol Nitric acid 3%

Hydrochloric acid 5% Nitric acid 10%

Isopropyl alcohol Phosphoric acid 43%

Sodium hypochlorite 10% Turpentine

INFORMATION

If contact with any of the above mentioned chemicals cannot be avoided, it is recom-

mended to first test the reaction of the substance at a spot of the metal housing which

is not visible to everybody.

Concentrated acetic acid Methyl ethyl ketone

Toluene Acetone

Nitric acid 30% Trichlorethylene

Ammonia 5% Phenol

Xylene Concentrated ammonia

Sodium hydroxide 5% Gasoline, 97 octane, unleaded

Ethyl acetate Sodium hydroxide 30%

Gasoline, 98 octane, leaded -

Solvent Time period

Acetone 10 min

Isopropanol 10 min

Toluene 5 h