Operating instructions

24
Compact Operating Instructions – DOP11C
4
Connecting the operator panel
Installation
4.5 Connecting the operator panel
4.5.1 Preparation
• Take suitable measures to prevent the motor from starting up unintentionally via the
connected frequency inverter.
– Disconnect the electronics input X13.0/controller inhibit in MOVIDRIVE
®
or
– Disconnect the supply voltage (24 V backup voltage must still be applied)
– Disconnect the terminals "clockwise rotation" and "enable" on MOVITRAC
®
Additional safety measures must be taken depending on the application to avoid injury
to people and damage to machinery.
NOTICE
Possible damage to property.
The power must be switched off when connecting the units.