SDS

GardenTech Sevin Insect Killer Concentrate
Date: 2/15/2018
avoided.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
Foam. Carbon dioxide (CO2). Dry chemical. Soft stream or water fog only if necessary.
Specific Hazards Arising from the
Chemical
None known
Explosion data
Sensitivity to Mechanical Impact
Not sensitive.
Sensitivity to Static Discharge
Not sensitive.
Protective equipment and
precautions for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH
(approved or equivalent) and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions
Isolate and post spill area. Remove all sources of ignition. Wear suitable protective clothing,
gloves and eye/face protection. For personal protection see section 8.
Other
For further clean-up instructions, call FMC Emergency Hotline number listed in Section 1
"Product and Company Identification" above.
Environmental Precautions
Keep people and animals away from and upwind of spill/leak. Keep material out of lakes,
streams, ponds, and sewer drains.
Methods for Containment
Dike to prevent runoff. Absorb with earth, sand or other non-combustible material and
transfer to containers for later disposal.
Methods for cleaning up
Clean and neutralize spill area, tools and equipment by washing with bleach water and
soap. Absorb rinsate and add to the collected waste. Waste must be classified and labeled
prior to recycling or disposal. Dispose of waste as indicated in Section 13.
7. HANDLING AND STORAGE
Handling
Handle in accordance with good industrial hygiene and safety practice. Do not contaminate
other pesticides, fertilizers, water, food, or feed by storage or disposal.
Storage
Keep away from open flames, hot surfaces and sources of ignition. Keep in a dry, cool and
well-ventilated place. Keep out of reach of children and animals. Keep/store only in original
container.
Incompatible products
No information available
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region
specific regulatory bodies.
Appropriate engineering controls
Engineering measures
Apply technical measures to comply with the occupational exposure limits. When working in
confined spaces (tanks, containers, etc.), ensure that there is a supply of air suitable for
breathing and wear the recommended equipment.
Individual protection measures, such as personal protective equipment
Eye/Face Protection
If there is a potential for exposure to particles which could cause eye discomfort, wear
chemical goggles.
Skin and Body Protection
Wear long-sleeved shirt, long pants, socks, and shoes.
Page 3 / 8