Use and Care Manual

ManualsBrandsSeville Classics ManualsFurnitureAirlift Walnut Pneumatic Sit-to-Stand Adjustable Desktop Converter

Model #: OFF65807, OFF65808, OFF65840

OFF92008B, OFF92009B

V2020

Thank you for choosing Seville Classics! We hope that you enjoy your new sit-to-

stand desk. Please read through this user guide for parts list, instructions, frequently

asked questions, and contact information

052220052220

AIRLIFT® Gas-Spring

Standing Desk Converter

Summary of content (4 pages)

PAGE 1
AIRLIFT® Gas-Spring Standing Desk Converter Model #: OFF65807, OFF65808, OFF65840 OFF92008B, OFF92009B V2020 Thank you for choosing Seville Classics! We hope that you enjoy your new sit-tostand desk.
PAGE 2
Parts List 2. Pull up on both AIRLIFT® levers and press down on desktop to lower. A. AIRLIFT® Desk (1) FAQS A. Yes! Be sure the desk is below it’s 33 lbs. maximum weight limit. Q. What size is the base? A. Base measures 32.75 inches wide and 22 inches deep. B. Brackets (2) Q. Do I need to plug it in? C. Tray (1) Dimensions: 35.43" W x 23.23" D x (6.25" to 19.1") H Maximum weight on tray: 5 lbs. (2 kgs) D. Zip-Ties (2) Maximum weight capacity overall: 33 lbs. (15 kgs) E.
PAGE 3
Safety STEP 1. Remove AIRLIFT® DESK (A) from box and set on ﬂat table. personal injury. A DO NOT place devices on desk edge. Requires 2 DO NOT route wires through desk legs. STEP 2. both sides of the AIRLIFT® DESK (A). STEP 3. E B MAKE SURE devices have cables long enough for the full-range (15 in/38 cm) of height-adjustment. DO NOT 5 G C 2 Flip TRAY (C) upside down. BRACKETS (B) to underside of TRAY (C) with SCREWS (G) and Allen Wrench (E).
PAGE 4
Cable Management STEP 4. Pull up on both AIRLIFT® levers and desktop to lift. D STEP 5. Hook BRACKETS (B) over the bolts on the inner legs of the AIRLIFT® DESK (A). Tighten bolts clockwise with included ALLEN WRENCH (E). E Organize loose cableswith included ZIP TIES (D). STEP 6. Place your belongings on the desktop to ﬁnish! ALWAYS route your cables through the REAR of the desk. NEVER route cables through the legs of the desk. WARNING: DO NOT PLACE HANDS ON DESK LEGS. MOVING PARTS CAN CRUSH.