Instructions / Assembly

5
C. Install the side channels in the same manner
making sure they are plumb before attaching with
screws.
D. Cut the top channel
in half lengthwise
with a utility knife.
Score the center
groove with the
knife and break the
channel in half.
Note: Cutting the top channel in half will allow the top row
of blocks to be installed. If panel is only one or two blocks
wide, side channel will also need to be cut in half.
E. Install the top channel:
• Place the half channel in the
top of the opening making
sure it is aligned with the
side channels.
• Attach the channel to the
opening by inserting #6 x 1"
atheadgalvanizedscrews
through the predrilled holes
in the channel. Insert a
screw at each end of the
channel.
F. Paint all of the screw heads
white to reduce their visibility.