Instructions / Assembly

19
D.Pushthespoonshapednishingtooloverthe
joints at a 45° angle to collect the excess sealant
and seal the joint. Periodically wipe the sealant
fromthenishingtool.
E. Seal the vertical joints in the same manner.
Carefully work the joint intersections to create a
smoothnish.
F. Let the sealant cure for 48 hours before putting
any stress on the panel.
G. Seal the perimeter joints with sealant.
Maintenance
An important part of the functional beauty
of Seves Glass Block products is that they are
virtually maintenance free! There’s nothing to
rot, rust, peel or paint. All that is needed is an
occasional wiping with a damp, soft cloth on
interior panels or a hosing on exterior panels.
With minimal attention, your Seves Glass Block
will remain sparkling and beautiful for years!
If you need assistance
We hope these instructions are clear and
answer your questions about the installation of
Seves Glass Blocks and Finishing Units with the
ProVantage
®
Glass Block Installation System. For
additional information on Seves Glass Block visit
our website at www.sevesglassblock.com.