Instructions / Assembly

3B
3C
3E
14
3. Install The Glass Block
A. Place a glass block in the opening against jamb.
B. Apply two 1/4" beads
of sealant behind the
raised edge of glass
block.
C. Press a vertical
spacer into place
next to the block.
D. Apply two 1/4" beads
of sealant behind the
raised edge of the
next glass block to
be inserted.
E. Insert sealant side
of next block tight
against the vertical
spacer and apply two
1/4" beads of sealant
behind the raised
edge of block.
F. Continue inserting
spacers and blocks
in this manner to
complete the row.
G.Checktherstrow
for alignment of
spacers and blocks.
Make sure all the
blocks are level and
the joints are tight.