Instructions / Assembly

4. Install The Second Through Next To
Last Row
A. Apply two 1/4" beads of sealant to the edges of
the horizontal spacer, 1/4" in from edge of spacer.
B. Install the second row:
• Start the row from the opposite end. For
example,ifyouinstalledtherstrowfromleft
to right, install the second from right to left.
• Continue to install blocks and vertical spacers
with sealant as illustrated.
C. Install the remaining rows in this manner until you
reach the last row. Check each row for alignment
vertically and horizontally.
8
4B