Instructions / Assembly

2. Install The Anchors

A.Cutthehorizontalspacersforeachcoursetot

the opening.

B. Insert an anchor into

the ends of the horizontal

spacers where they meet a jamb.

C. Apply two 1/4" beads of sealant to the edges of

the horizontal spacers 1/4" in from edge of spacer.

Place spacer sealant side down.

D. Then apply two 1/4" beads of sealant to this same

horizontal spacer, 1/4" in from edge of spacer.

E. Attach anchor to jamb with screws. Cut expansion

strip to length.

F. Place expansion strip over the anchor and against

the jamb.