Installation Guide

23
C. Place a “T” spacer at the
upper corner
of this block
against the
jamb.
B. Place a block (without mortar)
against the jamb using
spacers that are already in
place from the previous row,
for alignment.
5B
5C
5. Installing The Remaining Rows
A. Apply a 3/8" to 1/2" mortar bed on
top of the rst row.
Note: Be careful to keep the smooth
legs of the spacers free of mortar
to ensure that
the next row
of block will
sit at on the
spacers.
D. Continue with
each block as
you did with
the rst row.
5A
5D