Installation Guide

20
4. install the glass BlOCk
A. Place a glass block in the opening against the jamb.
B. Apply two 1/4” beads of sealant behind the raised edge of the
glass block.
C. Press a vertical spacer into place next to the block.
4B
4C
4D
C. Apply two 1/4” beads of sealant behind the raised edge of the
next glass block to be inserted.
D. Insert sealant side of next block tight against the vertical spac-
er and apply two 1/4” beads of sealant behind the raised edge
of block.
E. Continue inserting spacers and blocks in this manner to com-
plete the row.
F. Check the first row for alignment of spacers and blocks. Make
sure all the blocks are level and the joints are tight.