1 1 12 2 13 3 14 15 16 17 18 4 5 6 7 19 8 9 10 20 I II
● This appliance operates at very high Rotisserie toast oven Dear Customer, Before using the appliance, the user should read the following instructions carefully. ● ● Connection to the mains supply The appliance should only be connected to an earthed socket installed in accordance with the regulations. Make sure that the supply voltage corresponds with the voltage marked on the rating label. This product complies with all binding CE labelling directives. ● ● ● Familiarisation 1.
● ● ● ● ● ● ● ● appliance. Caution: do not place aluminium foil or anything similar between the grill rack and the pizza stone. Place the stone directly onto the rack. Do not allow the power cord to touch any hot parts of the appliance. Do not let the power cord hang free. Always switch off and remove the plug from the wall socket after use, as well as - in cases of malfunction, and - during cleaning.
- Place the idle end of the spit into its holding bracket on the other side (see picture I). - To remove the rotating spit, follow these steps in reverse order. - Biscuit tray The biscuit tray is ideal for baking biscuits. Ensure that the tray is placed onto the grill rack with the angled rim facing upwards (see picture). - Pizza stone - Always place the pizza stone on the middle of the grill rack before inserting the rack into the appliance.
Always place the baking tray on a heatresistant surface. - After use, set the 5-position switch to the “●” position and remove the plug from the wall socket. in a dish-washer. - If necessary, the reflector sheet may be removed before cleaning. Make sure that the reflector sheet is fitted in its proper position underneath the heating elements after cleaning. - Allow the pizza stone to cool down completely before cleaning. Any remaining food can be scraped off with a wooden spatula.
