Instructions

104 x 142 mm
11
the power cord, it must no longer be
used: even invisible damage may have
adverse effects on the operational safety
of the appliance.
∙ Do not allow the power cord to touch
any hot part of the appliance.
∙ Caution: Danger of burns. The housing
surfaces, grill areas and mini-pans
become hot during use and will remain
hot for some time afterwards.
∙ Do not leave the appliance unattended
while in use.
∙ During operation, the appliance must
be placed on a heat-resistant surface,
impervious to splashes and stains.
When cooking food with a high fat or
moisture content, splashes are not
always avoidable.
∙ Do not position the grill next to a wall or
corner,andensurethatnoinammable
materials are stored near it.
∙ Before use, the grill plate must be
positioned and locked on top of the
appliance, above the heating element.
∙ Caution: Do not operate the appliance
outdoors.
∙ Always remove the plug from the wall
socket
- after use,
- in case of any malfunction, and
- before cleaning the appliance.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ This appliance should only be used
with the attachments provided by the
manufacturer.
∙ Alwaysallowsufcienttimeforthe
appliance to cool down before removing
the grill plate, and before cleaning or
storing the unit.
∙ No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
Before rst use
∙ Remove any packing materials
completely.
∙ Before switching on the appliance for
thersttime,cleanthegrillplateand
mini-pans with a damp cloth.
∙ Heat the appliance and the pans for
about 30 minutes, without any food
in, to eliminate the smell typically
encounteredwhenrstswitchingona
grill (a small amount of smoke may also
be noticeable). Adequate ventilation
should be ensured by opening windows
or balcony doors.
∙ Let the grill cool down again.
∙ Clean it as described in the section
‘Cleaning and care’.
Grill plate
∙ Before the appliance is switched on,
position the grill plate on top of the
appliance over the heating element and
lock it.
∙ To lock, push the grill plate down and
move it towards LOCK so that the
protruding studs are safely engaged.
∙ To unlock, push the plate towards
UNLOCK.